CONE CRUSHER OPERATION

1. Start thin oil station before start the main unit, if the lubrication system is ok, start the main unit, then start the vibrating feeder if the machine running normal without load. Stop feeding before stop crusher, ores in crushing chamber is exhausted totally, stop the main unit, and stop the thin oil station at last.
2. Before start the thin oil station, open relative oil valve and switch, adjust the pressure adjust device, keep the pressure between 0.04-0.1MPa, the oil temperature should be in 30-40℃, if the temperature is too low, start the resistance heater first.
3. Please refer to the electricity control cabinet instruction for all electric switch function. And put them in proper position before start the main unit.